No products in the cart.
HORSTMANN - FAULT INDICATOR
Showing all 14 results
- Accessories
Current transformer split core diameter 15-55mm, 3m length
Split core current transformer mounted on medium voltage cable neck, inner diameter from 15-55mm, wire length 3m
Product Features
■ Designed for Sigma & ComPass Serial
■ Easy installation without removing the cable head
■ No maintenance requiredProduct document: Catalogue Intruction Manual SKU: 49-6024-001 - Accessories
Current transformer split core diameter 15-65mm, 3m length
Split core current transformer mounted on medium voltage cable neck, inner diameter from 15-65mm, 3m length wire
Product Features
■ Designed for Sigma & ComPass Serial
■ Easy installation without removing the cable head
■ No maintenance requiredProduct document: Catalogue Intruction Manual SKU: 49-6024-010 - Accessories
External indicator light for underground cable indicator
External indicator light for ComPass & Sigma serial wire 5m long. Used to indicate error signals of Sigma or ComPass outdoors without opening the station door
Product Features
■ Designed for Sigma & ComPass Serial
■ Light string 5m, 10m, 15m
■ High intensity LED can be seen at a distance of 30mProduct document: Catalogue Intruction Manual SKU: 49-0702-005 - Fault indicator Sigma serial
Line trouble alarm set – NAVIGATOR-LM Version C
The NAVIGATOR-LM Version C line fault alarm unit is designed to detect short circuits for overhead lines up to 160kV, indicate fault with high intensity LEDs and send signals to RTU cabinets on nearby power poles to transmit to the central monitoring system so that the operator can quickly locate the fault on the line.
Product Features
■ Short circuit fault detection
■ Error indication by LED with 360 degree viewing angle
■ Double flashes when a second problem is detected
■ Yellow LED indicates when battery life is 50 hours left
■ Manual reset and timer
■ Easily attached to the line using the operating leverProduct document: Catalogue Intruction Manual SKU: 41-2101-311 - Fault indicator Sigma serial
The underground cable indicator Sigma F+E 2.0
The underground cable indicator Sigma F+E 2.0 is designed to detect and display local and remote short-circuit and earth fault in the medium voltage grid. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Short circuit and earth fault detection with 3 single-phase current transformers.
■ Indicator per phase (LED)
■ Adjustable Trip current
■ External power supply 24Vdc
■ Remote alarmAdvantages of product
■ No false trips due to higher harmonics
■ Detection of high-impedance earth faults
■ Add fault direction function
■ Automatic and remote ResetProduct document: Catalogue Intruction Manual SKU: 37-2111-101 - Fault indicator ComPass serial
Underground cable fault alarm set with Modbus RS485 – ComPass A
ComPass A is a short circuit and earth fault alarm for medium voltage distribution grids with a direct earthed neutral system. Through the Modbus protocol, the device can be parameterized, reporting error events and sent measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect short circuit and ground faults with 3 single-phase current transformers
■ The screen displays the current of each phase
■ OLED display multi language, LED multicolor
■ Remote alarm via RS485 / Modbus and 4 NO contact
■ Easy operation, easy-to-read displayProduct document: Catalogue Intruction Manual SKU: 38-0102-001 - Fault indicator ComPass serial
Underground cable fault alarm set with Modbus RS485 – ComPass A 2.0
ComPass A is a short circuit and earth fault alarm for medium voltage distribution grids with a direct earthed neutral system. Through the Modbus protocol, the device can be parameterized, reporting error events and sent measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect short circuit and ground faults with 3 single-phase current transformers
■ The screen displays the current of each phase
■ OLED display multi language, LED multicolor
■ Remote alarm via RS485 / Modbus and 4 NO contact
■ Easy operation, easy-to-read displayProduct document: Catalogue Intruction Manual SKU: 38-0152-001 - Fault indicator Sigma serial
Underground cable indicator Sigma F+E 3 2.0
The underground cable indicator Sigma F+E 3 2.0 is designed to detect and display local and remote short-circuit and earth fault in the medium voltage grid. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Short circuit and earth fault detection with 3 single-phase current transformers.
■ Indicator per phase (LED)
■ Adjustable Trip current
■ External power supply 24Vdc
■ Remote alarmAdvantages of product
■ No false trips due to higher harmonics
■ Detection of high-impedance earth faults
■ Add fault direction function
■ Automatic and remote ResetProduct document: Catalogue Intruction Manual SKU: 37-5113-101 - Fault indicator ComPass serial
Underground fault indicator can be programmable, with Modbus RS485 – ComPass Bs 2.0
Fault indicator ComPass serialUnderground fault indicator can be programmable, with Modbus RS485 – ComPass Bs 2.0
ComPass Bs 2.0 is fault indicator for short-circuit and earth fault with directional current used in the medium voltage grid, the volte signal get by Wega1.2C, Wega2.2C. Through the Modbus protocol, the device can be parameterized, reporting error events and sent measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect directional short-circuit and earth fault by 3 single phase current transformer
■ Monitoring V, I, F
■ Load monitoring P, Q, S, Cosφ
■ Voltage monitoring V<, V>
■ OLED display multi language, LED multicolor
■ Remote alarm via RS485 / Modbus and 4 NO contact
■ Easy operation, easy-to-read display
■ Can be programmable to control other objectsProduct document: Catalogue Intruction Manual SKU: 38-4153-001 - Fault indicator ComPass serial
Underground fault indicator with directional current Modbus RS485 – ComPass B
Fault indicator ComPass serialUnderground fault indicator with directional current Modbus RS485 – ComPass B
ComPass B is fault indicator for short-circuit and earth fault with directional current used in the medium voltage grid, the volte signal get by Wega1.2C, Wega2.2C Through the Modbus protocol, the device can be parameterized, reporting error events and sent measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect directional short-circuit and earth fault by 3 single phase current transformer
■ Monitoring V, I, F
■ Load monitoring P, Q, S, Cosφ
■ Voltage monitoring V<, V>
■ OLED display multi language, LED multicolor
■ Remote alarm via RS485 / Modbus and 4 NO contact
■ Easy operation, easy-to-read displayProduct document: Catalogue Intruction Manual SKU: 38-4102-001 - Fault indicator ComPass serial
Underground fault indicator with directional current Modbus RS485 – ComPass B 2.0
Fault indicator ComPass serialUnderground fault indicator with directional current Modbus RS485 – ComPass B 2.0
ComPass B 2.0 is fault indicator for short-circuit and earth fault with directional current used in the medium voltage grid, the volte signal get by Wega1.2C, Wega2.2C. Through the Modbus protocol, the device can be parameterized, reporting error events and sent measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect directional short-circuit and earth fault by 3 single phase current transformer
■ Monitoring V, I, F
■ Load monitoring P, Q, S, Cosφ
■ Voltage monitoring V<, V>
■ OLED display multi language, LED multicolor
■ Remote alarm via RS485 / Modbus and 4 NO contact
■ Easy operation, easy-to-read displayProduct document: Catalogue Intruction Manual SKU: 38-4150-001 - Accessories
WEGA 1.2C voltage indicator for RMU cabinet
The WEGA 1.2C voltage indicator is based on the principle of cascading capacitors to lower the high voltage to the 110Vac threshold for the purpose of displaying phase status, testing and obtaining signals for the ComPass B fault alarm. Screen Functional display on the front of the WEGA 1.2C allows checking that all parameter settings comply with the standards
Product Features
■ Designed according to IEC 61243-5 (VDE 0682-415)
■ Wide voltage range (10 – 52 kV)
■ No maintenance required
■ Overvoltage indicator: Phase selection
■ Capacitive connection to ComPass B/BP/BS and SIGMA D/D+
■ Front Interface: Full-featured IEC 61243-5Product document: Catalogue Intruction Manual SKU: 51-1250-001 - Accessories
WEGA 2.2C voltage indicator for RMU cabinet
The WEGA 2.2C voltage indicator is based on the principle of cascading capacitors to lower the high voltage to the 110Vac threshold for the purpose of displaying phase status, testing and obtaining signals for the ComPass B fault alarm. Screen Functional display on the front of the WEGA 2.2C allows checking that all parameter settings comply with the standards
Product Features
■ Designed according to IEC 61243-5 (VDE 0682-415)
■ Wide voltage range (10 – 52 kV)
■ No maintenance required
■ Overvoltage indicator: Phase selection
■ Capacitive connection to ComPass B/BP/BS and SIGMA D/D+
■ Front Interface: Full-featured IEC 61243-5
■ Integrated LED voltage indicator
■ Built-in output relayProduct document: Catalogue Intruction Manual SKU: 51-2250-001
